XINTECH Micro sand blasting technology - Sablux sandblasting cabinets

Pressure blasting units for espacially high performances are used to clean coarse contaminations. The blasting medium that is used is filled into a special pressure container and directly subjected to the incoming pressurized air. Due to this technology a massive acceleration of the medium is achieved which also enables an ideal cleaning effect even for massive contaminations.
schaublin, lathe, almac, cyclematic, sablux, locatelli, mecolpress, sangiacomo, machining centers, hydraulic press, lathes, swissmac, sablux, nanotec, vertical machining center, second hand machines, services, revision, retrofit, after sale service, expertise
                                         

XINTECH technology
Micro sandblasting

Sandblasting cabinets



Every plastic processer knows the problem of accumulations in moulding tools. Not only the cleaning of colour pigment and filling material accu- mulations, but also oversprayed tools and screw contaminations belong to everyday routine. Due to the usage of abrasive free blasting mediums that are available in different grain sizes, all plastic accumulations can usually be removed within in minutes without changing the structure and without damaging the engravings and separating edges. Even correctly coated pieces can be bleaned without damaging the coat layer. As no chemicals are used and the surface to be cleaned is not subjected to increased temperatures, undesirable side effects can be excluded.

 
 
  XS 95 Xintech MasterClean

XS 95 Xintech MasterClean Pressure blasting units for espacially high performances are used to clean coarse contaminations. The blasting medium that is used is filled into a special pressure container and directly subjected to the incoming pressurized air. Due to this technology a massive acceleration of the medium is achieved which also enables an ideal cleaning effect even for massive contaminations. The MasterClean is equipped with lateral opening to clean extruder screws and similarly large components, which enable these parts to fit through.

Equipment:
Working grid made of perforated sheet metal Replaceable, wear proof gloves, lined cover 2 side doors 410x430mm, Blasting nozzle Ø 5mm, Reducing valve and manometer 0-10 bar, Automatic pressure cabin, Integrated, automatic cabin dedusting and dust separating system with high performance, cyclone, Foot pedal, Water separator, Integrated high performance filter system with 2 filter cartridges with automatic cleaning, Dust collecting container with fast lock, Door end switch


Technical data
Cabin dimensions: W 1020mm, D 1230mm, H 1910mm
Work room: D 950mm, D 750mm, H 510mm
Weight approx.: 440kg
Air conveying quantity: ± 1'350 Ltr./min. at 5 bar and blasting nozzle 5mm
Pressure range: 1-8bar
Electrical connection: 230 V / 50 Hz (3 Ph+N+E)
Air connection: G1/2"

 
 
  XS 75 Xintech MasterFinish

XS 75 Xintech MasterFinish Standard-Injector-Micro blasting unit for optimization and information of tool surfaces.
All processing of metallic surfaces leave residue, for example the «white zone» after wire or sinker erosion, or residue after grinding. Very frequently, these lead to problems in the deformability of plastic parts or contaminations due to accumulations. Due to the processing of the surfaces with the usage of micro blasting technology the tools are ideally prepared for a high productivity and lifetime. The multi level procedure used here includes defined blasting mediums, whose composition and grain size is determined according to the respective case of application. Especially in plastic processing, the quality of the article to be produced strongly depends on the surface condition of the tool.

Equipment:
Oil/Water separator, Inside lighting 36W, Lateral slider left and right (Opening W 400 x H 297mm), Viewing window with safety glass, Blasting gun hard metal Ø 5mm, Cleaning/air outlet valve in the blasting cabin, Conveyor injector unit with blasting material pre-acceleration, Automatic blasting material processing via integrated granulate separator, Integrated regulated filter system


Technical data
Cabin dimensions: W 760mm (without oil/water separator) D 865mm, H 1710mm
Work room: W 750mm, D 500mm, Medium utilization height 500mm
Weight approx.: 150kg
Air conveyance quantity: 395l/min
Power consumtion: 320W
Electrical connection: 230V/50Hz
Air connection: G 1/4"

 
 
  XS 75 Xintech DigiFinish

XS 75 Xintech DigiFinish Controlled and optimized blasting process through reproducible parameters.
Regulated blasting material quantity due to digitally adjustable frequency converter. Continuous monitoring of the effective throughput quantity by means of ultrasound throughput sensor (Option). Therefore no influence of the blasting material by accumulations or moisture in the blasting material. Digital target value setting 0-6 bar of the blasting pressure set by hand or as pre-determinded and object related data value as of date carrier (Option). Digitally adjustable blasting medium pre-acceleration (coupled to the cabin vacuum). Always guarantees the same flow ability thanks to blasting material drying, which works fully automatic over the digitally adjustable moisture threshold value.

Equipment:
Digital input of process parameters (process pressure, pre-acceleration, pressure, vacuum, blasting material moisture), Oil/water separator, Interior lighting 36W, Laterial slider left and right (opening W 400 x H 297mm), Viewing window with safety glass, Blasting gun hard metal Ø 5mm, Cleaning/air outlet valve in the blasting room, Heating system, Conveyance injector unit with blasting material pre-acceleration, Automatic blasting material processing via integrated granulate separator, Integrated regulated filter system


Technical data
Cabin dimensions: W 760mm (without oil/water separator) D 865mm, H 1710mm
Work room: W 750mm, D 500mm. Medium utilization height
Weight approx.: 160kg
Air conveyance quantity: 395l/min
Power consumtion: 750W
Electrical connection: 230V/50Hz
Air connection: G 1/4"

 
 
  XS 75 Xintech MicroProFinish

XS 75 Xintech MicroProFinish The MicroProFinish-unit is an advance development of the successful DigiFinish unit. These blasting units have the following main differences:
The units only have a main switch. All other functions and statements are done via display. The entire process as well as the individual process conditions and their condition parameters are displayed clearly structured on a colour display. All process parameters are adjustable via the visulisation display in the corresponding symbol (touch screen). All process parameters are monitored underneath each other in the highest and lowest range and can therefore not be adjusted fasely to each other or against each other. The smooth height adjustment is done by tipping on the corresponding symbol on the display. All elaborated and tested proess settings can be saved directly by tipping on the symbols on the dispay. Datasets saced in the unit memory can also be entered simply by tipping on the memory symbol. The unit can only be switched on via a generated password. With this password, the datasets can also be released individually or in packages. The maintenance and control intervals are announced or selected on the display, relating to the effective confition of the unit.

Equipment:
Colour Touch Panel for all status displays, Digital entry and automatic regulator of process parameters (process pressure, pre-acceleration pressure, vacuum, blasting material moisture), Oil/water separator, Interior lighting 36W, Lateral slider left and right (opening W 400 x H 297mm), Blasting gun hard metal Ø 5mm, Cleaning/air outlet valve in the blasting room, Heating system, Vonceyance injector unit with blasting material pre-acceleration, Automatic blasting material processing via integrated granulate separator, Integrated regulated filter system, Saving datasets with password protection, Monitored process parameters


Technical data
Cabin dimensions: W 760mm (without oil/water separator) D 865mm, H 1710mm
Work room: W 750mm, D 500mm, Medium utilization height 500 mm
Weight approx.: 160kg
Air conveyance quantity: 395l/min
Power consumtion: 750W
Electrical connection: 230V/50Hz
Air connection: G 1/4"

 
 
  XS 55 Xintech MasterFinish

XS 55 Xintech MasterFinish The micro blasting units XS 55 were developed as compact units to process smaller surfaces.
The basic of the casing design come from a success story of over 15 years. Beyond that, the main technical successes from the decades of experience with the 75-series were used in the new type model. In summary, this resulted in a cost-effective and yet highly technical blasting device. By using a frequency converter, the ventilator works on ideal effective level in every rotation range, which is not possible when using dampers. The digital pressure displays for pre-acceleration and process pressure that are available as options allow clear setting and is therefore also completely reproducible in later work processes.

Equipment:
Operating flap, lateral equipped with two gas pressure cylinders (opening 545mm x 300mm) Viewing window with replaceable frame with two screws accessible from the outside. Suction and filter unit, regulated via a smooth potentiometer (frequency converter), equipped with two high performance-micro filter-cartridges that are automatically cleaned pneumatically in standby and pause operation. Micro-blasting-material-separation unit can be optimized over ventilator torque. Outlet gun powered over grid pressure Pressurized air connection including oil/water separator G 1/4" Impulse foot switch Laterally operable dust drawer made of steel Two-pole three level switch (zero, standby and blast) Two piece perforated metal work grid with single hole diameter Ø 5mm, capacity up to 50 kg Firmly screwed working gloves Blasting material drying system, regulated via smooth potentiometer with touch protection, 0- 150 Watt (Option) Blasting gun with hard metal valve insert Ø 4mm Process blasting pressure adjustable from 0-6bar, pre-acceleration pressure adjustable from 0- 2bar via pressure regulating valve and analogous display on the operating panel.


Technical data
Cabin dimensions:W 550mm, D 665mm, H 890mm
Work room:W 545mm, D 370mm, Medium utilization height 350 mm
Power consumption:230VA
Electrical connection:230V/50Hz/60Hz
Air connection:G 1/4"
Pressure range:0.5-6 bar (Connecting pressure minimal 6 bar)


                                         
Home
Products
Machines - Stock overview
Used machines

Accessories toolings - Stock overview
Accessories toolings

Services  |  SUVA compliance  |  Revision  |  Retrofit
News
Contact
Links
Site Map
The world
Almac
Arco
Cyclematic
Hasegawa
Mecolpress
Missimi Berney
Somos Nanotec
Press G
Sablux
Sangiacomo
Schaublin Machines
Schaublin Collets
SWISSmac
Greub Machines SA
39, Bd des Eplatures
2304 La Chaux-de-Fonds
Switzerland

tel +41 (0)32 925-9540
fax +41 (0)32 925-9545
eMail:



All products, logos, trademarks or registered trademarks shown or mentioned belong to their respective owners.   -   copyright © 1998 - 2019
ascl.com
W3 Valid
x Home    Sablux    Xintech Sandblasting cabinets
Greub Machines SA

Greub Machines SA
39, Bd des Eplatures
2304 La Chaux-de-Fonds
Switzerland
tel +41 (0)32 925-9540
fax +41 (0)32 925-9545
www.greub.ch
Email: